Brands
Mr.Steam 103588DIG
Towel Warmer Digital Timer
Model
103588DIG
SKU
103588DIG
The optional Mr. Steam 103588DIG 24-hour In-wall digital timer comes standard with a white faceplate and allows for on/off and 24-hour towel warmer operation.
MSRP
$150.00
Your Price
$105.00
- 120V operation
- 24-Hour electronic timer
- On/off override operation
- Easy-to-use, pin type timer
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
- Standard White face plate
- Installation and operation manual
- Limited warranty
Swipe horizontally to reveal full table content.
| Model | 103588DIG |
|---|---|
| Shipping Weight (Lbs.) | 2 lbs |
| AC Voltage | 120V AC |
| Phase | Single Phase |
| Nominal Amperage | Less Than 1 Amp |
| Recommended Protective Device | 15 Amp |
| Recommended Minimum Copper Wire Supply | 14 AWG |
| Control “Rough-In” Cut Out | 2-1/2" x 3-1/2" |
| Width In Inches | 2-3/4" |
| Depth In Inches | 2" |
| Height In Inches | 4-3/8" |
Mr.Steam 103938
Acrylic Shield for Aroma Designer Finish SteamHead
Model
103938
SKU
103938SQ
Mounting over the MS 103937 or MS 104040 SteamHead and designed for use when acrylic or other non-heat resistant construction materials are used for steam room enclosure construction, the Mr.Steam Acrylic Shield will aid in diffusing the steamhead heat transfer and redirect the steam-flow. Recommended for steam rooms with minimal floor space, ceiling heights over 8' high and natural stone construction.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$80.00
- Clear Lexan construction, 1/8" thick, transparent look
- Round Shield measures 4-3/8" in diameter and is 1/2" deep
- Square Shield measures 4" square
- Integral, 1-5/8" diameter mounting hole
- Round Shield for use only with MS 103937 SteamHead
- Square Shield for use only with MS 104040 SteamHead
MrSteam 103978
Replacement Cable for eTempo Controls
Model
103978-30
SKU
103978-30
This ETempo Control cable is required for the operation of the remote EStart on/off secondary control on MrSteam’s Residential MS model steam bath generators with serial numbers beginning with a 900000.
MSRP
$180.00
Your Price
$126.00
30' cable for use with the eTempo/Start control or HomeWizard. For 60', look to 103978-60.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Please call 800.977.8326 to confirm correct use and current pricing.
All parts pricing is subject to change without notice.
Mr.Steam 104198
Pressure Reducing Valve
Model
104198
SKU
104198
Mr.Steam Pressure Reducing Valve aids in reducing the incoming water pressure as it enters the steam shower generator. The recommended incoming water pressure is 15-20 psi.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$229.50
Mr.Steam MSTS
Temperature Room Sensor W/ Integral 30 ft Cable, Tempo
Model
MSTS
SKU
MSTS
Mr.Steam Temperature Room Sensor with 30 ft Cable is designed for Tempo, eTempo, iTempo, and AirTempo Controls. Note that you cannot use a 30 ft plus a 60 ft cable together.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
MSRP
$225.00
Your Price
$157.50
Mr. Steam CU99331C
Transformer, Control Voltage, 208/240V To 120V
Model
CU99331C
The step-down transformer is used to supply the 120V control circuit.
- Transforms 208V or 240V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Swipe horizontally to reveal full table content.
| Model | CU99331C |
|---|---|
| Shipping Weight | 14 lbs |
Mr.Steam CU99331F
Transformer, Control Voltage, 480V To 120V
Model
CU99331F
The step-down transformer is used to supply the 120V control circuit.
- Transforms 480V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Swipe horizontally to reveal full table content.
| Model | CU99331F |
|---|---|
| Shipping Weight | 14 lbs |
Mr. Steam 100380MS
Orifice, MS/Super Tank
Model
100380MS
SKU
100380MS
This Orifice is for the use with Mr.Steam's MS/Super Series Tanks.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$91.00
Mr. Steam 100471-2
Probe, Water Level, MS & Super Series
Model
100471-2
SKU
100471-2
This Water Level Probe is required for appropriate water fill operation on Mr. Steam’s Residential MS model steam bath.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$65.50
- prevents dry firing of the heating element
- compatible with Mr. Steam's Residential MS models
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
- Water level probe
Swipe horizontally to reveal full table content.
| Model | 100471-2 |
|---|---|
| Fits Residential Models: | MS |
MrSteam 100476-2
Contactor, 24V, 40A, 2-Pole (MS 65- 400 1Ph)
Model
100476-2
SKU
100476-2
This 24V 40A 2-Pole Contactor is for use with MrSteam's MS65-400 1PH steam bath generators.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$163.25
- compatible with residential steam bath generators MS65 through MS400 with 240V electric service
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
- Contactor
Swipe horizontally to reveal full table content.
| Model | 100476-2 |
|---|---|
| Fits Residential Models: | MS65 through MS400 with 240V electric service |