Steamist's TA-100 Programmable Steamroom Temperature Alert helps ensure the safety and comfort of member bathers. Designed for use with Steamist HC series steam bath generators in health clubs, hotels, and spas.

This audible alarm sounds in the event the steam room maximum set temperature is exceeded or the CU SteamStop switch is pressed.

This CU SteamStop emergency stop switch electronically shuts down the steam generator and initiates the Digital 1 internal alarm and the CU Alarm, if installed.

Designed to gain traction where there is a potential for slipping, non-slip water-proof strips are for use on steam room flooring or bottom benching. Available in 1", 2" and 3" widths, these grit impregnated non-slip clear strips utilize superior adhesive backing and are packaged in 60' rolls allowing for custom-cut use.

High temperature limit device for use with any Mr.Steam CT or CU steam generator system to provide temperature shutoff and alarm functions.

The commercial steam temperature alert is a must-have for safety. The lock feature prevents users from turning off the system or changing the temperature setpoint. The interrupt relay disables the heater when the audible alarm sounds and the test button is used to check that the heater is disabled when the alert sounds. The alert cannot be reset until the room cools below the programmed temperature.

This commercial steam blowdown tank permits draining of hot boiler water into the tank before it is dumped into drainage system. Allowing you to comply with codes prohibiting discharge of water exceeding 140 degrees Fahrenheit. For use with commercial steam generators (5COM).

Many states and local jurisdictions, as a standard, require an independent, manual reset, second low water cut off control. This is a factory-installed option and cannot be sold without a 5COM Series Steam Generator.

Steam Generator Sold Separately