Steam Sauna Living FIT-215
Fitting Package for SM/SMP/TSG Series Generators
Model
FIT-215
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 3/8” Brass Close Nipple
- (1) 1/2” Brass Close Nipple
- (2) 1/2”F NPT x 1/2”F NPT Brass Union
- (2) 1/2”C x 1/2”C Brass Water and Drain Ball Valves
- (2) 3/4”F NPT x 3/4”F NPT Brass Union
- (1) 1/2”C x 1/2”M NPT Copper Adapter
- (4) 3/4”C x 3/4”M NPT Copper Adapter
- (1) 3/8” F NPT x 1/2” NPT Brass Reducer
- (1) Teflon Tape Roll
- (1) 1/2” F NPT x 1/2” Copper Adapter
Document
FIT-215_0.pdf184.36 KB
Steam Sauna Living SSL-T261
"Plug-In" Electrical Package, 30 AMP 240V 1PH
Model
SSL-T261
SKU
KIT
No need for frequent trips searching for those special electrical components. Steam Sauna Bath has carefully selected and packaged a durable power cord, receptacle, electrical box and cover plate for a simple, maintainable and serviceable steam generator installation. Use of these choice components will allow you to maximize your in-home, factory and labor warranties!
MSRP
$80.51
Your Price
$64.41
- Selected and packaged for simple, maintainable and serviceable steam generator installation
- Maximizes in-home, factory and Accurate Industries warranties
- One (1) 30AMP, 3-pole, 3-wire, flush-mounted power receptacle with mounting hardware
- One (1) duplex 4"x4" receptacle
- One (1) 4" square, 2-1/2" deep electrical box
- One (1) 6' 3-conductor grounded (3 #10AWG) power cord
- One (1) cord to electrical box connector
Steam Sauna Living SSL-T262
"Plug-In" Electrical Package, 50 AMP 240V 1PH
Model
SSL-T262
SKU
KIT
No need for frequent trips searching for those special electrical components. Steam Sauna Living has carefully selected and packaged a durable power cord, receptacle, electrical box and cover plate for a simple, maintainable and serviceable steam generator installation. Use of these choice components will allow you to maximize your in-home, factory and labor warranties!
MSRP
$80.51
Your Price
$64.41
- Selected and packaged for simple, maintainable and serviceable steam generator installation
- Maximizes in-home, factory and Accurate Industries warranties
- One (1) 50AMP, 3-pole, 3-wire, flush-mounted power receptacle with mounting hardware
- One (1) duplex 4"x4" receptacle
- One (1) 4" square, 2-1/2" deep electrical box
- One (1) 6' 3-conductor grounded (2 #6AWG, 1 #8AWG) power cord
- One (1) cord to electrical box connector
Steam Sauna Living FIT-219
Fitting Package for 2007 PRO Series Generators
Model
FIT-219
SKU
KIT
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
Note: Also compatible with PRO III series generators
MSRP
$234.07
Your Price
$187.26
No need for frequent trips searching for those special plumbing fittings…Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 1/2”F NPT x 1/2”F NPT Brass Union
- (1) 1/2” Brass Nipple
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (2) 1/2”C x 1/2”M NPT Copper Adapter
- (1) 12” 1/4”F NPT x 1/4”F NPT Braided Steel Water Line (included with generator)
- (1) 1/4”M NPT x 1/2”F NPT Copper Adapter (included with generator)
- (1) Teflon Tape Roll
Document
FIT-219_0.pdf759.21 KB
Steam Sauna Living FIT-220
Fitting Package for SSM & SSA Series Generators
Model
FIT-220
SKU
KIT
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
Note: Also compatible with PRO I and PRO II series generators
MSRP
$175.25
Your Price
$140.20
No need for frequent trips searching for those special plumbing fittings…Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 3/4”F NPT x 3/4”F NPT Brass Union
- (2) 1/2”F NPT x 1/2”F NPT Brass Unions
- (1) 1/2” x 3/8” Reducer
- (2) 1/2”C NPT x 1/2”M NPT Copper Adapters
- (3) 3/4”C NPT x 3/4”M NPT Copper Adapters
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (1) Teflon Tape Roll
Document
FIT-220.pdf199.41 KB
Steam Sauna Living FIT-222
Fitting Package for SAH Series Generators
Model
FIT-222
SKU
KIT
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
MSRP
$233.67
Your Price
$186.94
No need for frequent trips searching for those special plumbing fittings…Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 3/8” Brass Close Nipple
- (2) 3/8”F NPT x 1/2”M NPT Brass Reducer
- (1) 1/2” Brass Close Nipple
- (3) 1/2”F NPT x 1/2”F NPT Brass Union
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (1) 3/4”F NPT x 3/4”F NPT Brass Union
- (3) 1/2”C x 1/2”M NPT Copper Adapter
- (3) 3/4”C x 3/4”M NPT Copper Adapter
- (1) 1/2”F NPT x 1 /4”F NPT Brass Reducer
- (1) 1/4” Brass Close Nipple
- (1) Teflon Tape Roll
Document
FIT-222.pdf168.83 KB
Bathology RB 310
Steam Room Temperature Sensor Guard, 2" x 5"
Model
RB 310
A sensor tampering cure and more by Bathology!
Expect consistent and reproducible steam bathing temperatures when installing the RB 310 Steam Room Temperature Sensor Guard.
.
MSRP
$98.00
Your Price
$88.20
- Elegant 4B brushed stainless finish
- Sensor isolation mount
- Rugged 18 gauge stainless steel construction
- Small-scale, low profile design
- Stainless steel fasteners
- Progressive beveling and integral air slots
- Universal sensor installation
- Consistent and reproducible bathing experiences
- Enhanced sensor accuracy
- Well-balanced bathing environment
- Reduces sensor tampering
- Near-permanent installation
- Sensor guard, stainless steel, 5-1/8”W x 2-3/8”H x 1-1/4”D
- (3) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
- (3) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
- Sensor screw mount
- Sensor tie
- RTV silicone sealant, .5 oz tube
- Mounting template
- Installation and operation manual
Swipe horizontally to reveal full table content.
| Model | RB 310 |
|---|---|
| Shipping Weight | 2 lbs |
| Material | 18 gauge stainless steel, brushed 4B finish |
| Width | 5-1/8" |
| Height | 2-3/8" |
| Depth | 1-1/4" |
Bathology RB 320
Steam Room Temperature Sensor Guard, 6" x 9"
Model
RB 320
A sensor tampering cure and more…by Bathology!
Expect consistent and reproducible steam bathing temperatures when installing the RB 320 Steam Room Temperature Sensor Guard.
MSRP
$180.00
Your Price
$162.00
- Elegant 4B brushed stainless finish
- Sensor isolation mount
- Rugged 18 gauge stainless steel construction
- Progressive beveling and integral air slots
- Universal sensor installation
- Consistent and reproducible bathing experiences
- Enhanced sensor accuracy
- Well-balanced bathing environment
- Reduces sensor tampering
- Low profile design
- Stainless steel fasteners
- Near permanent installation
- Sensor guard, stainless steel, 6-1/8"W x 9-1/4"H x 2"D
- (5) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
- (5) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
- Sensor screw mount
- Sensor tie
- RTV silicone sealant, .5 oz tube
- Mounting template
- Installation and operation manual
Swipe horizontally to reveal full table content.
| Model | RB 320 |
|---|---|
| Shipping Weight | 3 lbs |
| Materials | 18 gauge stainless steel, brushed 4B finish |
| Width | 6-1/8" |
| Depth | 2" |
| Height | 9-1/4" |
ThermaSol 03-6152-050
Data Link Control Cable, 50'
Model
03-6152-050
SKU
03-6152-50
UPC
65259205902
Water tight 50' data link control cable for use with ThermaSol AF and Pro Series residential generator systems.
MSRP
$165.00
Your Price
$115.50
- Compatible with ThermaSol AF and Pro Series
- Water tight
- Allows for fully digital networked communication between the steam generator and the controller
- 50' data link control cable
Swipe horizontally to reveal full table content.
| Model | 03-6152-050 |
|---|---|
| Shipping Weight | 2 lbs |
| Generator Control Connection | CAN-Bus Connection |
| Generator Control Cable | 50' Data Cable |
| Length | 600" |
ThermaSol 03-6152-100
Data Link Control Cable, 100'
Model
03-6152-100
SKU
03-6152-100
UPC
65259205903
Water tight 100' data link control cable for use with ThermaSol AF and Pro Series residential generator systems.
MSRP
$235.00
Your Price
$164.50
- Compatible with ThermaSol AF and Pro Series
- Water tight
- Allows for fully digital networked communication between the steam generator and the controller
- 100' data link control cable
Swipe horizontally to reveal full table content.
| Model | 03-6152-100 |
|---|---|
| Shipping Weight | 3 lbs |
| Generator Control Connection | CAN-Bus Connection |
| Generator Control Cable | 100' Data Cable |
| Length | 1200" |