Mr. Steam Commercial Parts
Brands
Mr.Steam 103588DIG
Towel Warmer Digital Timer
Model
103588DIG
SKU
103588DIG
The optional Mr. Steam 103588DIG 24-hour In-wall digital timer comes standard with a white faceplate and allows for on/off and 24-hour towel warmer operation.
MSRP
$150.00
Your Price
$105.00
- 120V operation
- 24-Hour electronic timer
- On/off override operation
- Easy-to-use, pin type timer
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
- Standard White face plate
- Installation and operation manual
- Limited warranty
Swipe horizontally to reveal full table content.
| Model | 103588DIG |
|---|---|
| Shipping Weight (Lbs.) | 2 lbs |
| AC Voltage | 120V AC |
| Phase | Single Phase |
| Nominal Amperage | Less Than 1 Amp |
| Recommended Protective Device | 15 Amp |
| Recommended Minimum Copper Wire Supply | 14 AWG |
| Control “Rough-In” Cut Out | 2-1/2" x 3-1/2" |
| Width In Inches | 2-3/4" |
| Depth In Inches | 2" |
| Height In Inches | 4-3/8" |
MrSteam 103978
Replacement Cable for eTempo Controls
Model
103978-30
SKU
103978-30
This ETempo Control cable is required for the operation of the remote EStart on/off secondary control on MrSteam’s Residential MS model steam bath generators with serial numbers beginning with a 900000.
MSRP
$180.00
Your Price
$126.00
30' cable for use with the eTempo/Start control or HomeWizard. For 60', look to 103978-60.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Please call 800.977.8326 to confirm correct use and current pricing.
All parts pricing is subject to change without notice.
Mr.Steam 104198
Pressure Reducing Valve
Model
104198
SKU
104198
Mr.Steam Pressure Reducing Valve aids in reducing the incoming water pressure as it enters the steam shower generator. The recommended incoming water pressure is 15-20 psi.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$229.50
Mr.Steam MSTS
Room Temperature Sensor, with Integral 30' Cable for Tempo controls
Model
MSTS
SKU
MSTS
This Room Sensor is for use on Tempo, eTempo, iTempo, and AirTempo controls on Mr.Steam’s Residential MS model steam bath generators.
MSRP
$225.00
Your Price
$157.50
- Temperature sensing capability, 105-120 degrees Fahrenheit
- Temperature sensing accuracy +/- 2 degree Fahrenheit
- Stainless steel finish
- No-voltage operation
- Low-profile operation
- MSTS surface-mounted sensor probe, 1-1/2” long, 1/4” diameter
- Sensor cable, 30’ long, permanently affixed to sensor and 3-pin plug-in connector
- RTV silicone sealant, .5 ounce tube
- Installation and Operation Manual
- Product Warranty
Swipe horizontally to reveal full table content.
| Model | MSTS |
|---|---|
| Shipping Weight | 2 lbs |
| DC Voltage | 5V DC |
| Generator Control Connection | 3 Pin, Plug-In Connector |
| Generator Control Cable | 30', 3 Conductor, 24 AWG, Shielded Cable |
| Depth | 1-1/2" |
| Diameter | 1/4" |
Mr.Steam 103985
Polycarbonate Shield For 103984 Steam Head
Model
103985
SKU
103985
This Polycarbonate Shield is recommended on each steam head emitting steam on Mr.Steam’s Commercial CU model steam bath generators.
MSRP
$75.00
Your Price
$60.00
- Polycarbonate Shield for use with 103984 Steam Head
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Mr.Steam 104072
Steam Vent for CU 99216 Timers
Model
104072
SKU
104072
The Mr.Steam Steam Vent is required for use with CU 99216DIG Digital Timer and CU 99216B Mechanical Timer.
Your Price
$338.75
Swipe horizontally to reveal full table content.
| Model | 104072 |
|---|---|
| Shipping Weight | 3 lbs |
Mr. Steam CU99331C
Transformer, Control Voltage, 208/240V To 120V
Model
CU99331C
The step-down transformer is used to supply the 120V control circuit.
- Transforms 208V or 240V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Swipe horizontally to reveal full table content.
| Model | CU99331C |
|---|---|
| Shipping Weight | 14 lbs |
Mr.Steam CU99331F
Transformer, Control Voltage, 480V To 120V
Model
CU99331F
The step-down transformer is used to supply the 120V control circuit.
- Transforms 480V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Swipe horizontally to reveal full table content.
| Model | CU99331F |
|---|---|
| Shipping Weight | 14 lbs |
Mr.Steam 100378
Probe Isolator
Model
100378
SKU
100378
UPC
767931700309
The Mr.Steam Probe Isolator is required for appropriate water fill operation to avoid improper sensing of water on CU Commercial Steam Shower Generators CU360 - CU4500.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$120.00
- Allows water probes to function more precisely
- Eliminates water splash from the boiling water
- Compatible with CU Commercial Steam Shower Generators CU360 - CU4500
- Probe Isolator
Swipe horizontally to reveal full table content.
| Model | 100378 |
|---|---|
| Fits Models | CU360 - CU4500 |
| Weight | 1 lb |
Mr. Steam 100380MS
Orifice, MS/Super Tank
Model
100380MS
SKU
100380MS
This Orifice is for the use with Mr.Steam's MS/Super Series Tanks.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$91.00