Amerec AK30
AK Series 30kW Steam Shower Generator
The Amerec AK30 is a 30kW home steam shower generator designed for large residential or commercial steam rooms with dimensions up to 1300 adjusted cubic feet (ACF). The AK30 is made up of trio generators in tandem (one 9kw and two 11kw generators).
Required control package sold separately.
- Sequential temperature control for consistent flow
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Available Auto Drain automatic draining system
- Ability to field wire in 1-phase or 3-phase
- Ability to connect multiple generators to heat steam baths larger than 1300 cubic feet
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- 30kW steam bath generator; one 9KW and two 11KW steam generators
- Two Gang cables
- Note: Does not include two additional steam heads. First steam head comes with Control package.
- Installation and operation manual
- Limited warranty
Model | AK30 |
---|---|
Minimum Adjusted Cubic Feet | 1000 |
Maximum Adjusted Cubic Feet | 1300 |
Kilowatt Rating (KW) | 31KW |
Shipping Weight (Lbs.) | 110 lbs |
AC Voltage | 240V AC |
DC Voltage | 5V DC |
Phase | Single Phase |
Water Supply Connection | (3) 3/8" NPT |
Generator Steam Line Connection | (3) 1/2" NPT |
Steam Head Connection | (3) 1/2" NPT |
Drain Connection | (3) 3/4" NPT |
Safety Relief Valve Connection | (3) 3/4" NPT |
Safety Relief Valve PSIG | (3) 10 PSIG |
Control "Rough In" Cut Out | 2-3/8" Diameter |
Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 7/8" Diameter |
Generator Control Connection | 8 Pin, Snap-In Connector |
Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
Width In Inches | (3) 16-1/2" |
Depth In Inches | (3) 6-1/4" |
Height In Inches | (3) 15" |
Glacier K2 Operating Equipment Package for AK Series Generators. Includes steam head.
Columbia K3 Operating Equipment Package for AK Series Generators. Includes steam head.
The Amerec K2 steam shower generator control kit works with Amerec AK series steam generators. Wi-Fi and Smart home ready, this control features adjustable time, temperature and a 24 hour delay and includes a ComfortFlo steam head.
6 different Trim Ring/Steam head finishes for the K2 control are available.
The Amerec K3 steam shower generator control kit works with Amerec AK series steam generators. This control kit is able to be mounted inside or outside the steam room and features a digital control, remote sensor and includes a ComfortFlo steam head.
6 different Steam head finishes for the K3 control kit are available.