ThermaSol DS-650
Day Spa Series 20kW Steam Bath Generator
Model
DS-650
SKU
DS-2-650
ThermaSol DS-650 steam generator is 20kW and designed for day spas and hotel steam showers. It can service up to 4 steam shower enclosures with combined dimensions of up to 2,600 adjusted cubic feet (ACF).
MSRP
$8,450.00
Your Price
$5,915.00
- Industrial grade, serviceable heating element
- Non-pressurized vessel
- Operates two, three, or four steam room environments
- Integral drain pan with 3/4" NPT fitting
- Stainless steel design inside and out
- Durable electronic components
- Can be installed up to 50 feet from the room
- Hardware Kit provided
- Large capacity tank size
- CSA/CUL listed
- ASME safety valve
- 1 Generator
- In-Room Controls (2,3, or 4)
- Commercial Steamheads (2,3, or 4)
- Installation manual
- Limited Warranty
Model | DS-650 |
---|---|
Minimum Adjusted Cubic Feet | 1300 |
Maximum Adjusted Cubic Feet | 2600 |
Kilowatt Rating (KW) | 20 KW |
Shipping Weight (Lbs.) | 46 lbs |
AC Voltage | 240V AC |
Phase | Single Phase |
Nominal Amperage | 2 Circuits, 46 Amps Each |
Recommended Protective Device | 2 Circuits, 50 Amps Each |
Recommended Minimum Copper Wire Supply | 2 Circuits, 8 AWG Each |
Water Supply Connection | 3/8" NPT |
Generator Steam Line Connection | 1/2" NPT |
Steam Head Connection | 1/2" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 1-1/16" |
Generator Control Connection | 6 Pin, Snap-In Connector |
Generator Control Cable | 50', 6 Conductor, 22 AWG, Shielded Cable |
Width | 18-3/4" |
Depth | 13-3/4" |
Height | 16" |
Document
DaySpa Generators IOM.pdf1.17 MB
Document
DaySpa DS-650 Spec Sheet.pdf317.37 KB