Amerec AK7.5
AK Series 7.5kW Steam Shower Generator
The 7.5kW Amerec AK7.5 home steam shower generator is engineered for residential and day spa steam baths up to 200 adjusted cubic feet (ACF).
Required control package sold separately.
- Sequential temperature control for consistent flow
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Available Auto Drain automatic draining system
- Ability to field wire for 1-phase or 3-phase phase
- Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- 7.5KW steam bath generator
- Installation and operation manual
- Limited warranty
| Model | AK7.5 |
|---|---|
| Minimum Adjusted Cubic Feet | 80 |
| Maximum Adjusted Cubic Feet | 200 |
| Kilowatt Rating (KW) | 7.5 KW |
| Shipping Weight (Lbs.) | 35 lbs |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 31 Amps |
| Recommended Protective Device | 40 Amp |
| Recommended Minimum Copper Wire Supply | 8 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 3/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 10 PSIG |
| Control "Rough In" Cut Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width In Inches | 16-1/2" |
| Depth In Inches | 6-1/4" |
| Height In Inches | 15" |
Glacier K2 Operating Equipment Package for AK Series Generators. Includes steam head.
Columbia K3 Operating Equipment Package for AK Series Generators. Includes steam head.
The Amerec K2 steam shower generator control kit works with Amerec AK series steam generators. Wi-Fi and Smart home ready, this control features adjustable time, temperature and a 24 hour delay and includes a ComfortFlo steam head.
6 different Trim Ring/Steam head finishes for the K2 control are available.
The Amerec K3 steam shower generator control kit works with Amerec AK series steam generators. This control kit is able to be mounted inside or outside the steam room and features a digital control, remote sensor and includes a ComfortFlo steam head.
6 different Steam head finishes for the K3 control kit are available.
The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, the control is backward compatible with the classic KT60. Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. With maximum session settings of up to 125 °F and 60 minutes (residential use), this control kit includes a ComfortFlo steam head.
6 different Steam head finishes for the KT3 control kit are available.
The Amerec K4 steam shower generator control kit works with Amerec AK-series steam bath generators. This control kit may be mounted inside or outside the steam room and features a non-thermostatic control and includes a ComfortFlo steam head.
Choose from 6 available designer finishes for the ComfortFlo steam head.
Stainless Steel Generator Drip Pan with Threaded Drain Fitting.
The 5304-031 Control Cable is a 25' 8-Pin cable for use with the KT60, K60, K30, R30K, and DC60 operating controls. From the year 1993 to current. This cable is also used for connecting generators together for use as a tandem system.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
ComfortFlo Steam Head w/ Insulator, 1/2" NPT
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
Enhance the soothing and revitalizing effect of your steam bath with the Amerec LED Light Kit. Create the perfect atmosphere with different moods for different times of day. Designed for use in any steam bath (AK Generator series) or shower enclosure this recessed light system includes 2 LED lights (up to 5 additional lights may be added), power transformer, chroma controller and control switch which allows the user to change colors and patterns of the lights with just a simple touch.
Steam Generator and Generator Control sold separately.
THIS PRODUCT IS NO LONGER AVAILABLE. PLEASE SEE OUR SELECTION OF LIGHTING.
Two waterproof flush-mounted 2-way in-shower speakers. Amerec Premium Speakers work with your existing home audio system to provide full range sound to your steam bathing or wet environment. Once installed, this set of two speakers will deliver your favorite sounds and assist in creating the ideal bathing experience!
This sturdy wall-mounted, fold-up teak bath and shower seat is designed to make the steam bathing area as practical and comfortable as possible.
This wall mount, fold down White Relax shower seat measures 13-1/2" x 9-1/4"
Transform your steam room into a luxurious aroma bath with Amerec Eucalyptus Aroma Essential Oil.
Choose from 2-oz., 8-oz., 16-oz., and 1-gal. sizes.
The A220FP introduces aromatherapy oils directly into the steam line while allowing the bather to initiate the pump from inside the steam shower enclosure. The fragrance controller allows the bather to adjust the strength and frequency and eliminates the needs to dispense the oils directly into the steamhead.
Designed to be used with the AK steamers.
ADK Automatic Drain Valve Kit for AK Series generators. Automatically drains and flushes tank after each steam bath. Order one (1) ADK drain for each generator when ordering ganged systems.
The Amerec ASX120 water filtration system will condition tap water providing optimum water characteristics for their specified applications. The result is reduced equipment maintenance requirements and longer equipment life.
Replacement filter for the ASX120 water filtration system. Capacity is estimated at one filter per year.