Amerec DSNR-60S
Designer S Series 6.0kW Sauna Heater
The Amerec Designer S Series DSNR-60S 6.0 kilowatt sauna heater with built-in controls is engineered to power sauna rooms up to 300 cubic feet (CF).
Must order SC Control Separately.
- Wall-mounted
- Stainless steel construction
- Industrial grade, serviceable heating elements
- Operates with SC Series Controls
- Exceptionally large rock capacity
- Direct rock-to-heating element contact
- UL listed
- For sauna rooms from 175 to 310 cu. ft.
- 6.0KW Heater, 23"H x 16-1/2"W x 11"D
- 50 Lbs. of Olivine sauna stones
- Installation Manual
- Limited Warranty
Model | DSNR-60s |
---|---|
Shipping Weight | 86 lbs |
Minimum Cubic Feet | 175 |
Maximum Cubic Feet | 310 |
Kilowatt Rating | 6.0 KW |
Width | 16-1/2" |
Depth | 11" |
Height | 23" |
Sleek, flush mounted design with satin stainless steel face plate, the Amerec SC-60 sauna control panel is a wall-mounted sauna control with a 60-minute timer, lightswitch, adjustable thermostat control, and heat indicator light.
Must use with CB7 contactor for selected phase (sold separately).
Sleek, flush mounted design with satin stainless steel face plate, the Amerec SC-9 sauna control panel is a wall-mounted sauna control with a 60-minute timer with 9 hour time-delay for startup, lightswitch, adjustable thermostat control, and heat indicator light.
When used with Floor Heater models requires use with CB7 contactor for selected phase (sold separately).
Sleek, flush mounted design with satin stainless steel face plate, the Amerec SC-Club sauna control panel is a wall-mounted sauna control with on/off switch for club use with attendant on duty (no timer), lightswitch, adjustable thermostat control, and heat indicator light.
When used with Floor Heater models requires use with CB7 contactor for selected phase (sold separately).