AromaMist AI-2
Aroma Bathing System, 240V
Installed out-of-sight and near your steam bath equipment, the AromaMist 240V Aroma Pump works in conjunction with your steam bath generator to inject Eucalyptus or another aroma oil directly into the steam line.
- Designed and built for the toughest aromas
- Full range of adjustability for any strength aroma
- Stainless steel/brass atomizing head
- Digital backlit LCD display and easy-to-use keypad make for simple adjustments
- Programmable "on" delay mists aroma only when steam is entering room
- Optional aroma tank
- 3-Function anti-siphon, back pressure and check valve
- Heat isolation chamber
- Pump limit settings
- Microprocessor driven operation
- Installs out of sight and near steam generator
- On-board memory to maintain settings
- Stainless steel/brass atomizing head
NOTE: When purchasing an AromaMist steam shower aroma oil pump, select a 5-gallon container of aroma. If you’re uncertain of which fragrance you should try, SteamSaunaBath recommends selecting Eucalyptus oil, as it is the most accepted and invigorating steam bathing experience available!
- AromaMist pump, 240V
- 15' Power cord
- Single outlet electrical box
- 240V outlet
- Electrical cover plate
- Electrical box connector
- 1/2" Brass T
- Brass reducer
- Heat isolation chamber
- Atomizing head
- Three function valve
- Suction foot valve & ceramic weight
- 20' 3/8" Suction/discharge tubing
- 10' 3/8" Vinyl priming tubing
Model | AI-2 |
---|---|
Shipping Weight (Lbs.) | 15 lbs |
AC Voltage | 240V AC |
Phase | Single Phase |
Nominal Amperage | 1 Amp |
Recommended Protective Device | 15 Amp |
Width In Inches | 4-1/4" |
Depth In Inches | 10-1/4" |
Height In Inches | 6-3/4" |
A must-have when considering the AromaMist Aroma Bathing System! This ruggedly constructed, wall/floor-mounted 5-gallon aroma tank houses the AromaMist pump and makes for a simple, secure and out of the way installation. No tubes, no sloppy changing of aroma containers and no mess. Simply fill it and forget it...for up to 6 months!